Many home networks using D-Link or even Netgear broadband routers use this address range. An router may assign 192.168.0.2 or even 192.168.0.3 to some device in your local network automatically, or even an administrator could perform it manually.
192.168.0.2 might be the second internet protocol address from the range 192.168.0.1 – 192.168.0.255, whereas 192.168.0.3 might be the third address in the exact same range.
Both these IP addresses have been private IP addresses, meaning they may be accessed only from within a private network and never by the”outside” enjoy on the internet. Because of this reason, they don’t have to be unique from network to network such as the way the public ip address address has to be different across the full internet.
Why Are These Addresses so Common?
192.168.0.2 and 192.168.0.3 have been commonly used on private networks because many routers have been configured using 192.168.01 because their default address. A router having a default address of 192.168.01 (many Belkin routers) will typically assign the upcoming available address into those devices in its network.
For example, if your laptop is the first device that connects to your home network, then it will likely receive an IP address of 192.168.0.2. If your pill is next the router will more than likely provide it with exactly the 192.168.0.3 address, and so on.
However, the router may use 192.168.0.2 or even 192.168.0.3 in case the admin chooses. In cases such as this, where a router has been assigned an address , state, 192.168.0.2, subsequently a very first address it gives you for your own devices is typically 192.168.0.3, after which 192.168.0.4, etc..
How 192.168.0.2 and 192.168.0.3 Are Assigned ?
Many routers automatically assign IP addresses using DHCP therefore your addresses could be reused since devices disconnect and reconnect. Which means a router using an IP address of 192.168.0.1 will assign its own devices an address within the range of 192.168.0.1 into 192.168.0.255.
Usually, there isn’t any reason to change this dynamic assignment also it will take the burden off the network administrator to manually provide outside addresses. However, when a conflict arises in ip address assignment, you’re able to access the router’s administrative console and then explicitly assign a particular IP address into a certain device – that is called a static ip address address.
This means that both 192.168.0.2 and 192.168.0.3 can be assigned automatically or manually depending on the network and its devices and users. If you are owner of a Comcast router then probably your default login address will be different from that of 192.168.0.2 and 192.168.0.3, you can check it out here
How to Access a 192.168.0.2 or 192.168.0.3 Router ?
All routers are all accessible with a web interface usually called the”administrative console,” which provides a solution to customize the router’s settings, such as configure wireless access, change DNS serversand configure DHCP, etc..
If your router has an IP of 192.168.0.2 or 192.168.0.3, only input this in your browser URL address bar:
- http://192.168.0.2
- http://192.168.0.3
When asked for a password and input whatever password that the router has been configured to use. When you’ve never changed the password then this really is going to function as the default password which the router has been shipped with. NETGEAR, D-Link, Linksys, also Cisco have default username and password passwords.
Try something basic if you don’t know the password, such as user, root, admin password, 1234, or something similar.
Once the console is open, you’re able to view all of the devices connected to a network and then customize your assigned IP addresses, among other things.
Note that this is usually not necessary, also it’s really best to just proceed along with the router’s automatic assignment of IP addresses. In reality, you may never have to access your router’s admin console because nearly all routers direct users through the initial setup using some kind of wizard.